Skip to content
845 kr Regular price
Unit price
per 

Spider Farmer GGS SensorPro Kit (CO₂ + PPFD)

Tax included. Shipping calculated at checkout.

Precision that powers growth

Upgrade your GGS setup with a CO₂ sensor and PPFD (PAR) meter. Together with Temp/RH/VPD you get the data to tune light, CO₂, and climate—so plants photosynthesize efficiently and grow consistently, day after day.

Selected by Stockholm Reptiles – Why we chose it

  • Truly data-driven: PPFD + CO₂ + VPD makes dialing in targets straightforward.

  • Faster optimization: Find the right light height and CO₂ level for each stage.

  • Plug-and-play in the GGS ecosystem: Replaces the light/day-night probe in GGS kits and AC5/AC10.

  • Better yield potential: CO₂ enrichment with high PPFD can drive faster growth and higher yields.

What you can do

  • Measure PPFD at canopy — set lamp height accurately and avoid hotspots.

  • Control CO₂ with confidence — track levels over time and sync with light schedules/dimming.

  • Fine-tune the climate — combine with Temp/RH/VPD for stable conditions.

Recommended PPFD levels

  • Seedlings: 100–300 µmol/m²/s

  • Vegetative: 400–600 µmol/m²/s

  • Flowering: 800–1000 µmol/m²/s

Compatibility

  • GGS devices only. Works with GGS Controller and GGS AC5/AC10 (replaces the Temp/RH/Light probe in those kits).

  • Not compatible with controllers or accessories from other brands.

In the box

  • Temp/Humi/VPD/PPFD (PAR) Meter

  • CO₂ Meter

  • RJ12 cables: 2× 2.5 m + 1× 0.25 m

  • RJ12 splitters

  • Bracket for the PAR meter

When to choose SensorPro

  • You run high PPFD and plan CO₂ enrichment.

  • You want correct lamp height and fewer hotspots.

  • You need data to drive faster growth and yield.

Using the PPFD (PAR) meter

  • Measure at canopy height (where the leaves are).

  • Take multiple points and adjust fixture height until the average hits your target.

Recommended PPFD levels

  • Seedlings: 100–300 µmol/m²/s

  • Vegetative: 400–600 µmol/m²/s

  • Flowering: 800–1000 µmol/m²/s

CO₂ guidelines & safety

  • Typical targets: 800–1200 ppm in sealed, high-PPFD setups.

  • Run CO₂ only while lights are on; ventilate between cycles.

  • Follow safety instructions for CO₂ in enclosed rooms.

Swapping probes in GGS

Replace the Temp/RH/Light probe with the Temp/Humi/VPD/PPFD probe and add the CO₂ sensor. Everything connects via RJ12 (plug-and-play).

Common mistakes (and fixes)

  • High PPFD without CO₂ → lower PPFD or raise CO₂ in a controlled way.

  • Uneven PPFD → measure more points; even out fixture distance/angle.

  • No day/night after upgrade → PPFD probe lacks side light sensor; set day/night in the schedule.

Pre-order

High demand—pre-order now. Estimated shipping Oct 8–15.

Spider Farmer CO₂-sensor hängande över bladverk – exakt mätning för optimerad tillväxt./Spider Farmer CO₂ sensor hanging above foliage—accurate readings for optimized growth.
GGS 4-i-1 Sensor Pro monterad på stång i odlingstält – mäter PPFD, VPD, temperatur och luftfuktighet./ GGS 4-in-1 Sensor Pro mounted on a tent bar—measures PPFD, VPD, temperature and humidity.
Spider Farmer GGS SensorPro i förgrund med PPFD/Temp/RH; tre LED-armaturer ovanför växter i grow-rum. / Spider Farmer GGS SensorPro in the foreground with PPFD/Temp/RH; three LED fixtures above plants in a grow room.

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Availability